Alertes de station d'accueil


Cette stratégie gère les"alertes de la station d'accueil".

contrôlées par l'utilisateur : Autoriser l'utilisateur du système à choisir entre l'affichage de l'alerte ou sa suppression. (Il s'agit du format par défaut).

Activé : Cette alerte doit être affichée si sa condition est détectée.

Désactivé : Cette alerte doit être supprimée si sa condition est détectée.

Remarque : La sélection de"Pas configuré" ou de"Désactivé" aura le même effet.

Pris en charge sur : Dell Power Manager (lorsque le système BIOS prend en charge l'extenseur de batterie)

Registry HiveHKEY_LOCAL_MACHINE
Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
Value NameDockAlertsGroup
Value TypeREG_SZ
Enabled ValueTrue
Disabled ValueFalse
Activer la stratégie:
Registry HiveHKEY_LOCAL_MACHINE
Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
Value NameAlertsPolicyVersion
Value TypeREG_SZ
Value1.0.0

Sélectionnez la configuration de la stratégie pour chaque alerte :

La batterie actuellement connectée à votre système n'est pas en mesure de fournir suffisamment d'énergie à votre station d'accueil pour lui permettre de fonctionner normalement


  1. Contrôlé par l'utilisateur
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameBatteryCannotPowerDockingStation
    Value TypeREG_SZ
    ValueUserControlled
  2. Activé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameBatteryCannotPowerDockingStation
    Value TypeREG_SZ
    ValueTrue
  3. Désactivé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameBatteryCannotPowerDockingStation
    Value TypeREG_SZ
    ValueFalse

Redémarrez votre système pour finaliser la mise à jour du logiciel de votre station d'accueil. Votre système doit être connecté à votre station d'accueil pendant le redémarrage.


  1. Contrôlé par l'utilisateur
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameDockFirmwareUpdateRequiresReboot
    Value TypeREG_SZ
    ValueUserControlled
  2. Activé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameDockFirmwareUpdateRequiresReboot
    Value TypeREG_SZ
    ValueTrue
  3. Désactivé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameDockFirmwareUpdateRequiresReboot
    Value TypeREG_SZ
    ValueFalse

Votre port n'accepte pas l'alimentation. Pour fournir une alimentation à votre système lorsqu'il est ancré à la station d'accueil, connectez une carte d'alimentation à votre système.


  1. Contrôlé par l'utilisateur
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameDockConnectedToNonPowerInput
    Value TypeREG_SZ
    ValueUserControlled
  2. Activé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameDockConnectedToNonPowerInput
    Value TypeREG_SZ
    ValueTrue
  3. Désactivé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameDockConnectedToNonPowerInput
    Value TypeREG_SZ
    ValueFalse

La prise en charge de plusieurs stations d'accueil simultanément est impossible. Déconnectez les stations d'accueil supplémentaires.


  1. Contrôlé par l'utilisateur
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameMultipleDocksNotSupported
    Value TypeREG_SZ
    ValueUserControlled
  2. Activé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameMultipleDocksNotSupported
    Value TypeREG_SZ
    ValueTrue
  3. Désactivé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameMultipleDocksNotSupported
    Value TypeREG_SZ
    ValueFalse

Le câble connectant le système et la station d'accueil ne permet d'obtenir qu'une fonctionnalité limitée. Connectez le câble recommandé pour votre station d'accueil.


  1. Contrôlé par l'utilisateur
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCCableCapabilityBelowDockRequirement
    Value TypeREG_SZ
    ValueUserControlled
  2. Activé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCCableCapabilityBelowDockRequirement
    Value TypeREG_SZ
    ValueTrue
  3. Désactivé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCCableCapabilityBelowDockRequirement
    Value TypeREG_SZ
    ValueFalse

La station d'accueil que vous avez connectée ne permet pas d'obtenir pas une fonctionnalité complète lorsqu'elle est connectée au port actuel. Si vous possédez un port Thunderbolt, connectez une station d'accueil à ce port pour obtenir une fonctionnalité complète.


  1. Contrôlé par l'utilisateur
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCPortCapabilityBelowDockRequirement
    Value TypeREG_SZ
    ValueUserControlled
  2. Activé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCPortCapabilityBelowDockRequirement
    Value TypeREG_SZ
    ValueTrue
  3. Désactivé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCPortCapabilityBelowDockRequirement
    Value TypeREG_SZ
    ValueFalse

Le port de votre station d'accueil n'accepte pas l'alimentation. Connectez une carte d'alimentation au port d'alimentation de votre station d'accueil.


  1. Contrôlé par l'utilisateur
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCPowerAdapterNotSupported
    Value TypeREG_SZ
    ValueUserControlled
  2. Activé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCPowerAdapterNotSupported
    Value TypeREG_SZ
    ValueTrue
  3. Désactivé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCPowerAdapterNotSupported
    Value TypeREG_SZ
    ValueFalse

Votre station d'accueil n'est pas en mesure de fournir suffisamment d'énergie à votre système, afin de répondre aux exigences minimales lui permettant de fonctionner normalement.


  1. Contrôlé par l'utilisateur
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameDockPowerCapabilityBelowSystemMinimum
    Value TypeREG_SZ
    ValueUserControlled
  2. Activé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameDockPowerCapabilityBelowSystemMinimum
    Value TypeREG_SZ
    ValueTrue
  3. Désactivé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameDockPowerCapabilityBelowSystemMinimum
    Value TypeREG_SZ
    ValueFalse

La station d'accueil que vous avez connectée ne permet pas d'obtenir l'ensemble des fonctionnalités lorsqu'elle est connectée au port actuel. Si vous possédez un port Thunderbolt, connectez la station d'accueil à ce port en utilisant le câble recommandé pour votre station d'accueil afin d'obtenir l'ensemble des fonctionnalités.


  1. Contrôlé par l'utilisateur
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCCableIncompatibleWithPort
    Value TypeREG_SZ
    ValueUserControlled
  2. Activé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCCableIncompatibleWithPort
    Value TypeREG_SZ
    ValueTrue
  3. Désactivé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCCableIncompatibleWithPort
    Value TypeREG_SZ
    ValueFalse

Votre port USB Type-C ne prendra pas en charge l'ensemble des fonctionnalités d'accueil (par exemple, mises à jour de micrologiciel d'accueil). Il fournira cependant la vidéo, les données, l'Ethernet et l'alimentation.


  1. Contrôlé par l'utilisateur
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCPortPartialFuncitonalitySinglePortOnly
    Value TypeREG_SZ
    ValueUserControlled
  2. Activé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCPortPartialFuncitonalitySinglePortOnly
    Value TypeREG_SZ
    ValueTrue
  3. Désactivé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCPortPartialFuncitonalitySinglePortOnly
    Value TypeREG_SZ
    ValueFalse

La station d'accueil que vous avez connectée ne permet pas d'obtenir l'ensemble des fonctionnalités lorsqu'elle est connectée au port actuel. Utilisez le port USB Type-C situé sur le côté gauche de votre système.


  1. Contrôlé par l'utilisateur
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCPortPartialFuncitonalityAlternatePortAvailable
    Value TypeREG_SZ
    ValueUserControlled
  2. Activé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCPortPartialFuncitonalityAlternatePortAvailable
    Value TypeREG_SZ
    ValueTrue
  3. Désactivé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCPortPartialFuncitonalityAlternatePortAvailable
    Value TypeREG_SZ
    ValueFalse

The docking station you have connected cannot provide full performance while connected to the current port. If you have a Thunderbolt port, attach the docking station to that port for full functionality.


  1. Contrôlé par l'utilisateur
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCPortDockConnectedToDisplayPort
    Value TypeREG_SZ
    ValueUserControlled
  2. Activé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCPortDockConnectedToDisplayPort
    Value TypeREG_SZ
    ValueTrue
  3. Désactivé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCPortDockConnectedToDisplayPort
    Value TypeREG_SZ
    ValueFalse

Your USB Type-C port does not support full docking functionality such as dock firmware updates. However, the port does provide video, data, and ethernet function. To supply power to your system while docked, attach a power adapter directly to your system.


  1. Contrôlé par l'utilisateur
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCPortSinglePortVideoDataOnly
    Value TypeREG_SZ
    ValueUserControlled
  2. Activé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCPortSinglePortVideoDataOnly
    Value TypeREG_SZ
    ValueTrue
  3. Désactivé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCPortSinglePortVideoDataOnly
    Value TypeREG_SZ
    ValueFalse

The cable you have connected is not supported by this dock.


  1. Contrôlé par l'utilisateur
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCDualCCableIsNotSupported
    Value TypeREG_SZ
    ValueUserControlled
  2. Activé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCDualCCableIsNotSupported
    Value TypeREG_SZ
    ValueTrue
  3. Désactivé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCDualCCableIsNotSupported
    Value TypeREG_SZ
    ValueFalse

The cable you have connected is not supported by this dock. This dock supports Dual-C cable only.


  1. Contrôlé par l'utilisateur
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCDualCCableIsOnlySupported
    Value TypeREG_SZ
    ValueUserControlled
  2. Activé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCDualCCableIsOnlySupported
    Value TypeREG_SZ
    ValueTrue
  3. Désactivé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCDualCCableIsOnlySupported
    Value TypeREG_SZ
    ValueFalse

The dock you have connected is not compatible with your system.


  1. Contrôlé par l'utilisateur
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCDualCDockIsNotCompatible
    Value TypeREG_SZ
    ValueUserControlled
  2. Activé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCDualCDockIsNotCompatible
    Value TypeREG_SZ
    ValueTrue
  3. Désactivé(es)
    Registry HiveHKEY_LOCAL_MACHINE
    Registry PathSOFTWARE\Policies\Dell\CommandPowerManager
    Value NameUsbCDualCDockIsNotCompatible
    Value TypeREG_SZ
    ValueFalse


dellpowermanagerpoweralerts.admx